In most cases, water heating from oil or gas heating can be easily decoupled. The advantage of this is that you can save an enormous amount of energy compared to the energy resources from oil, gas and wood. To achieve this, the central heating really only needs to be on in the cold half of the year.

Unlike with conventional boilers, a 400-volt connection is not required. 230 volts are fully sufficient for the eco-boiler. In addition, the devices are exempt from all periods of down-time. Nevertheless, the eco-boiler can take advantage of low electricity tariffs during the night thanks to a sophisticated programme.

Depending on the circumstances, installation takes between 5 and 8 hours. After this, the eco-boiler is ready to use at your location.

The thermal conductivity of stainless steel is about half that of enamelled steel. This is why stainless steel is also a good insulating material. The stainless steel boiler is double-walled, which not only increases safety, but also has an additional insulating effect. The eco-boiler thus loses less heat via its jacket. This optimises time already during the heating phase and reduces losses several times over. Of course (like all boilers), the stainless steel boiler has an additional insulating layer on the outside. On the other hand, enamelled steel boilers sometimes rust, because over time, the enamel layer can come off. Environmentally friendly, hygienic and sustainable!

Stainless steel is a very environmentally friendly material. It can be recycled again and again and does not react in contact with the environment or water. No elements are discharged that could alter the composition of the water. Stainless steel has good corrosion resistance. This allows good protection against Legionella and reduces the risk of calcium deposits in the tanks.

We assume a net air volume of approximately 20m3, so that the eco-boiler can be operated inside and without air piping. Of course, with our wide range of products, one almost always finds a solution for fitting a device at all possible locations.

In addition, the device can take advantage of the resulting waste heat from the heating system in winter by means of clever air piping. And in the summer months, it can help to cool the inner shell of the building. In situations where space is very limited, both the incoming and the outgoing air can be removed from or directed to the outside.

Of course, the eco-boiler has a service flange, through which the device can be regularly descaled, like conventional boilers. However, since the process water is produced in a gentle way via the heat pump, much less lime is deposited in comparison to conventional electric boilers.

The device automatically performs a full water diversion to protect against Legionella every 14 days. During this process, the hot water is heated to a temperature of 65 degrees. This protects you from Legionella without fail. In addition, the device can render its services for the remainder of the period using lower temperatures, thus requiring less energy.

The “plug and play” mode eliminates the need for any official start-up from your vendor or installer. The device is pre-set in auto mode and delivered with a target temperature of 55 degrees. After successful and expert installation, it thus only needs to be switched on. If further fine adjustments are necessary after the introductory phase, they can be very easily made using the supplied instructions and the device’s simple menu navigation. Alternatively, our customer service team will make the desired setting changes with you directly, over the telephone.

The models 13 and 14 have direct WiFi control of the eco-boiler devices built-in, which can be regulated by the user worldwide, via a special app. The eco-boiler thus lives up to the current trend and the development in the Internet of Things towards the connection of all household appliances.

This is included in models 03 / 04 / 04D / 13 / 14. The additional heating is primarily used to ensure that the process water can be reheated immediately and quickly in the event of excessive use of hot water. The ceramic shell in the models mentioned above ensure that the heating element requires almost zero maintenance and, in addition, will last almost three times as long as a normal heating element.